Irradiance calibrated tungsten halogen light source. Wavelength range from 360-2500 nanometers.
View Product
The AvaLight-CAL-Mini is a spectral calibration lamp, available in Mercury-Argon (253.6-922.5 nm). The technical data is shown below. It comes in the Mini-housing and is equipped with a connector at the rear enabling you to switch the unit on/off remotely with a TTL signal.
PS-12V/2.08A power supply is included.
View Product
Optional upgrade for AvaSoft- Basic includes advanced features such as store to RAM, external trigger control, FWHM calculations, time series, and auto wavelength calibration.
View Product
Optional upgrade for AvaSoft- Basic includes all of the advanced features such as store to RAM, external trigger control, FWHM calculations, time series, and auto wavelength calibration included in the AvaSoft-Full upgrade as well as the full suite of application modules: LIBS, Thin Film, Raman, Irradiance, Color, and Chemometry, as well as process control and real-time exporting to Excel.
View Product
The first of its kind 4096 pixel AvaSpec-Mini features with CMOS detector and low-noise electronics. Applications: OES, General UV/VIS spectroscopy, Thin film metrology
View Product
The MKII series AvaSpec-Mini with CMOS technology with low-noise electronics. Ideal for: OES, General UV/VIS spectroscopy, Thin film metrology
View Product
CMOS-based detector, EVO series electronics low-noise electronics with Gigabit Ethernet communications. This instrument is the device of the future, updated for forward-looking interoperability.
View Product
The AvaSpec-ULS2048XL-EVO combines exceptional quantum efficiency with high speed communication with back-thinned CCD 2048 pixel detector.
View Product
All cuvette holders have a 5 mm wide slit to hold filters and a cover to prevent ambient light from entering the light path. The CUV-UV/VIS, CUV-FL-UV/VIS and CUV-ALL/UV/VIS are specially designed for absorption and fluorescence measurements and should be used with standard 10×10 mm cuvettes. All cuvette holders have a 5 mm wide slit to hold filters and a cover to prevent ambient light from entering the light path.
View Product
The FCR-COL adjustable UV/VIS/NIR collimating and focusing lens enables focusing on a measurement spot at an extended distance.
View Product
Interface cable AvaSpec-USB2 platform to FOS-2 and AvaLight-S with shutter, 2 m.
View Product
Crush-proof polyurethane clamshell case for portability and use in the field.
View Product
For diffuse reflection measurements, Avantes offers the WS-2 reference tile. For specular reflection measurements, the RS-2 is available.
View Product
The RPH-1 accommodates our standard 6.5 mm diameter reflection probes.
View Product
An Attenuator allows light intensity to be reduced and helps in situations where detector saturation is an issue. It is attached to the light source using an SMA connector to couple to other measurement devices and your spectrometer.
View Product
Avantes offers both direct attach and in-line filter holders as well as a wide range of round 12 mm filters.
View Product
Cosine correctors collect light from a 180° angle. This eliminates optical interface problems caused by light collection sampling geometry experienced in other sampling devices like fiber-optics alone, with collimating lenses, or in integrating spheres.
View Product
A collimating lens is used to convert divergent beams of light into a parallel beam.
Avantes collimating lenses are optimized for the UV/VIS/NIR range (200-2500 nm) and have anodized aluminum housings.
View Product
These feedthroughs are designed for use with fiber-optics in vacuum chambers, such as for plasma and coating deposition monitoring. They can be used in chambers with wall thicknesses of 5-40 mm and vacuum levels up to 7-10 millibar. Requires 2 ME-FI-SM-MM fiber interconnects.
View Product
Reflection probes are used to obtain spectral information of diffuse, or specular materials. The light from a light source is sent through six illumination fibers to the sample and the reflection is measured by a 7th fiber in the center of the reflection probe tip. The 7th fiber is coupled to a spectrometer configured to the appropriate wavelength range of interest.
View Product
600mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.
SMA 905; 0.22 NA; 200-2500 nm.
View Product
400mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.
SMA 905; 0.22 NA; 200-2500 nm.
View Product
200mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.
SMA 905; 0.22 NA; 200-2500 nm.
View Product
Both a deuterium light source ( between 200 and 550 nm) and a halogen light source (550 nm to 2500 nm) provide light between 200 and 2500 nm for nearly all absorbance chemistry.
View Product
Pulsed xenon light source. Synchronize flashes with data collection via cable interface.
View Product
A compact, stabilized halogen light source, with adjustable focusing of the fiber connection, maximizing output power at the desired wavelength. The light source also has adjustable output power to provide extra power or longer bulb life.
View Product
My Cart 