Find your Spectroscopy Accessories Here

AvaLight-CAL-Mini with PS-12V/2.08A power supply

The AvaLight-CAL-Mini is a spectral calibration lamp, available in Mercury-Argon (253.6-922.5 nm). The technical data is shown below. It comes in the Mini-housing and is equipped with a connector at the rear enabling you to switch the unit on/off remotely with a TTL signal.

PS-12V/2.08A power supply is included.

AvaSoft- Full Upgrade

Optional upgrade for AvaSoft- Basic includes advanced features such as store to RAM, external trigger control, FWHM calculations, time series, and auto wavelength calibration.

AvaSoft- All Upgrade

Optional upgrade for AvaSoft- Basic includes all of the advanced features such as store to RAM, external trigger control, FWHM calculations, time series, and auto wavelength calibration included in the AvaSoft-Full upgrade as well as the full suite of application modules: LIBS, Thin Film, Raman, Irradiance, Color, and Chemometry, as well as process control and real-time exporting to Excel.

AvaSpec-Mini4096CL-UVI10

The first of its kind 4096 pixel AvaSpec-Mini features with CMOS detector and low-noise electronics. Applications: OES, General UV/VIS spectroscopy, Thin film metrology

AvaSpec-Mini2048CL-UVI25

The MKII series AvaSpec-Mini with CMOS technology with low-noise electronics. Ideal for: OES, General UV/VIS spectroscopy, Thin film metrology

AvaSpec-ULS2048CL-EVO-RS-UA

CMOS-based detector, EVO series electronics low-noise electronics with Gigabit Ethernet communications. This instrument is the device of the future, updated for forward-looking interoperability.

AvaSpec-ULS2048XL-EVO *Preconfigured

*Available only through Edmund Optics

The AvaSpec-ULS2048XL-EVO combines exceptional quantum efficiency with high speed communication with back-thinned CCD 2048 pixel detector.

Fiber Interconnects

Panel Mountable Fiber Interconnects

Cuvette Holders

All cuvette holders have a 5 mm wide slit to hold filters and a cover to prevent ambient light from entering the light path. The CUV-UV/VIS, CUV-FL-UV/VIS and CUV-ALL/UV/VIS are specially designed for absorption and fluorescence measurements and should be used with standard 10×10 mm cuvettes. All cuvette holders have a 5 mm wide slit to hold filters and a cover to prevent ambient light from entering the light path.

Reflection Probe Collimating Lens

The FCR-COL adjustable UV/VIS/NIR collimating and focusing lens enables focusing on a measurement spot at an extended distance.

Replacement Interface Cable for AvaLight-Xe

Interface cable AvaSpec-USB2 platform to FOS-2 and AvaLight-S with shutter, 2 m.

AvaTrek Case

Crush-proof polyurethane clamshell case for portability and use in the field.

Reference Tiles

For diffuse reflection measurements, Avantes offers the WS-2 reference tile. For specular reflection measurements, the RS-2 is available.

Reflection Probe Holder

The RPH-1 accommodates our standard 6.5 mm diameter reflection probes.

Attenuators

An Attenuator allows light intensity to be reduced and helps in situations where detector saturation is an issue. It is attached to the light source using an SMA connector to couple to other measurement devices and your spectrometer.

Filter Holders

Avantes offers both direct attach and in-line filter holders as well as a wide range of round 12 mm filters.

Refunds and Returns Policy

Cosine Correctors

Cosine correctors collect light from a 180° angle. This eliminates optical interface problems caused by light collection sampling geometry experienced in other sampling devices like fiber-optics alone, with collimating lenses, or in integrating spheres.

Collimating Lens

A collimating lens is used to convert divergent beams of light into a parallel beam.

Avantes collimating lenses are optimized for the UV/VIS/NIR range (200-2500 nm) and have anodized aluminum housings.

Vacuum Feedthrough

These feedthroughs are designed for use with fiber-optics in vacuum chambers, such as for plasma and coating deposition monitoring. They can be used in chambers with wall thicknesses of 5-40 mm and vacuum levels up to 7-10 millibar. Requires 2 ME-FI-SM-MM fiber interconnects.

Reflection Probes

Reflection probes are used to obtain spectral information of diffuse, or specular materials. The light from a light source is sent through six illumination fibers to the sample and the reflection is measured by a 7th fiber in the center of the reflection probe tip. The 7th fiber is coupled to a spectrometer configured to the appropriate wavelength range of interest.

600 Micron Diameter Core Fiber Patchcord

600mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.

SMA 905; 0.22 NA; 200-2500 nm.

400 Micron Diameter Core Fiber Patchcord

400mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.

SMA 905; 0.22 NA; 200-2500 nm.

200 Micron Diameter Core Fiber Patchcord

200mm Fiber Core. (red PVC jacket shown, BX stainless steel also available)
Choose length and jacketing options.

SMA 905; 0.22 NA; 200-2500 nm.

Avalight DHc with Power Supply

Both a deuterium light source ( between 200 and 550 nm) and a halogen light source (550 nm to 2500 nm) provide light between 200 and 2500 nm for nearly all absorbance chemistry.

Avalight-XE with PS-12V/1.0A Power Supply

Pulsed xenon light source. Synchronize flashes with data collection via cable interface.

Avalight-HAL-S-Mini with Power Supply

A compact, stabilized halogen light source, with adjustable focusing of the fiber connection, maximizing output power at the desired wavelength. The light source also has adjustable output power to provide extra power or longer bulb life.